Search

Adler B15 drilling rig for wells geological wells - high quality mechanization - different equipment and machine types for different depths and requirements

Drill B 15 Ideal for well drilling, geothermal drilling and geological exploration drilling The powerful B-series compact drilling rigs enable you to drill holes up to 25 m even in hard-to-reach places. With a transport width of 78 cm and a height of only 195 cm, you can drive through every "door" and thus reach backyards and enclosed gardens. At the same time, you can safely reach your drilling point on difficult terrain with the standard chain wheels. Our drilling rigs are therefore used for well drilling, geothermal drilling and geological exploration drilling. Due to the low weight, the compact design and the integrated units (such as drive unit via the chain undercarriages, powerful rinsing pumps, remote controls), you reduce your investment and set-up costs to a minimum and thus increase your yield! For almost all requirements, we provide you with the necessary equipment and a coherent concept. Please request your individual offer from us!
Call for pricing
Share
banner

advantages
inexpensive entry-level device for light to medium-heavy soils
ideal for depths up to approx. 25 m with drill diameters of approx. 150 mm
Base unit for geological surveys
Low operating weight of approx. 1.4 t and the machine width of 80 cm enable work on hard-to-reach drilling points
Up to 25 m depth

Accessories / Characteristics B 15
Rinse hole depth: 25 m / diameter: 150 mm
Hole punch hole depth: 25 m / diameter: 120 mm
Dry drilling depth: 10 m / diameter: 110 mm
Hollow auger method -
Ground investigation yes
Weapon sounding yes


Technical specifications
Power unit (Kubota engine) 2 cyl. / 11 kW / 15 hp
Tank capacity (fuel) 30 l
ADLER Crawler Track F 17 Width: 725 mm - 1.125 mm (telescopic)
Support feet 4 x mechanical
Drill pipe 1,5 m
Feed length 1.8 m
Feed 6 kN
Retraction force 9 kN
Feed system Hydraulic motor with roller chain
hydraulic drill head with
Side scavenger ABK 315 passage: 90 daNm / 65 U / min
2 '
hydraulic drill head with
Transmission (2-stage)
Passage 2 1/2 "on request
Flushing pump 30 m3 / h - 3 bar
Lift Clamp Passage /
Lifting force / stroke up to Ø 219 mm / 80 kN / 200 mm
Oblique drilling -
Winch hydraulic:
Tensile force / rope length / Ø rope 5 kN / 30 m / 6 mm
Cable remote control for the
Traction drive -
Transport dimensions (L / W / H) 3.250 / 800 / 1.950 mm (with safety guard)
Weight of basic unit 1.4 t

application
well drilling
Geothermal well drilling
Geological exploration holes

advantages
inexpensive entry-level device for light to medium-heavy soils
ideal for depths up to approx. 25 m with drill diameters of approx. 150 mm
Base unit for geological surveys
Low operating weight of approx. 1.4 t and the machine width of 80 cm enable work on hard-to-reach drilling points
Up to 25 m depth

Accessories / Characteristics B 15
Rinse hole depth: 25 m / diameter: 150 mm
Hole punch hole depth: 25 m / diameter: 120 mm
Dry drilling depth: 10 m / diameter: 110 mm
Hollow auger method -
Ground investigation yes
Weapon sounding yes


Technical specifications
Power unit (Kubota engine) 2 cyl. / 11 kW / 15 hp
Tank capacity (fuel) 30 l
ADLER Crawler Track F 17 Width: 725 mm - 1.125 mm (telescopic)
Support feet 4 x mechanical
Drill pipe 1,5 m
Feed length 1.8 m
Feed 6 kN
Retraction force 9 kN
Feed system Hydraulic motor with roller chain
hydraulic drill head with
Side scavenger ABK 315 passage: 90 daNm / 65 U / min
2 '
hydraulic drill head with
Transmission (2-stage)
Passage 2 1/2 "on request
Flushing pump 30 m3 / h - 3 bar
Lift Clamp Passage /
Lifting force / stroke up to Ø 219 mm / 80 kN / 200 mm
Oblique drilling -
Winch hydraulic:
Tensile force / rope length / Ø rope 5 kN / 30 m / 6 mm
Cable remote control for the
Traction drive -
Transport dimensions (L / W / H) 3.250 / 800 / 1.950 mm (with safety guard)
Weight of basic unit 1.4 t

application
well drilling
Geothermal well drilling
Geological exploration holes

Filters
Sort
display