Cerca

B75pro Adler drilling rig for geological well wells - high quality mechanization - different equipment and machine types for different depths and requirements

Drill B75pro Ideal for well drilling, geological exploration and dry drilling The powerful compact drilling rigs of the B series enable you to drill holes up to a depth of 150 m, even in hard-to-reach places. With a transport width of 88 cm and a height of only 257 cm you remain flexible. At the same time, you can safely reach your drilling point on difficult terrain with the standard chain wheels. Our drilling rigs are therefore used for well drilling, geothermal drilling and geological exploration drilling. Due to the low weight, the compact design and the integrated units (such as drive unit via the chain undercarriages, powerful rinsing pumps, remote controls), you reduce your investment and set-up costs to a minimum and thus increase your yield! For almost all requirements, we provide you with the necessary equipment and a coherent concept. Please request your individual offer from us!
Chiama per un preventivo
Condividere
banner

advantages

Powerhouse with 75-diesel-PS and Deutz engine of the latest emission level 5
extremely high retraction force of 5 t due to extra strong mast design
larger chassis and reinforced support feet
Feed system via lifting cylinder
standard with mast lowering and 2-D mast tilt
Up to 150 m depth

Accessories / Profile B 75 pro
 
Rinse hole depth: 150 m / diameter: 200 mm
Hole punch hole depth: 100 m / diameter: 155 mm
Dry drilling depth: 30 m / diameter: 219 mm
Holbohrschneckenverfahren Teufe: 35 m / diameter: 205 mm
Site investigation yes
Ordnance exploratory yes


Technical specifications

Drive unit (Deutz engine) 4 cyl. / 55 kW / 75 hp diesel (emission level 5)
Tank capacity (fuel) 45 l
ADLER Crawler Track F 35 Width: 835 mm - 1.235 mm (telescopic)
Support feet 4 x mechanical
Drill pipe 2 m
Feed length 2.3 m
Feed 15 kN
Retraction force 50 kN
Mast lowering 300 mm yes
2-D mast tilt by 5 °
forward and laterally yes
Feed system via hydraulic cylinder
hydraulic drill head with
Side scavenger ABK 800: 200 daNm / 80 U / min 2 1/2 "
Drilling drive can be swiveled mechanically (optionally hydraulically)
hydraulic drill head with
Transmission (2-stage)
Passage 2 1/2 "1st gear (slow): 440 da.Nm / 50 rpm
2nd gear (fast): 220 da.Nm / 100 rpm
other speeds and torques possible
Flushing pump 120 m3 / h - 8 bar
Lift Clamp Passage /
Lifting force / stroke up to Ø 219 mm / 100 kN / 200 mm
Clamp-crushing Hubschelle
Clamping force / stroke / lifting force /
Torque up to Ø 219 mm
118 kN / 250 mm / 120 kN /
10.6 kNm
Slant drilling optional
Winch hydraulic:
Tensile force / rope length / Ø rope 5 kN / 30 m / 6 mm
(optional 10 kN / 75 m / 7 mm)
Mast extension optional
Cable remote control for the
Drive yes
Cable remote control for driving
and drilling optional
Transport dimensions (L / W / H) 4.950 / 880 / 2.575 mm (without protective device)
Weight of basic unit from 3.5 t


application

well drilling
Geothermal well drilling
Geological exploration holes


advantages

Powerhouse with 75-diesel-PS and Deutz engine of the latest emission level 5
extremely high retraction force of 5 t due to extra strong mast design
larger chassis and reinforced support feet
Feed system via lifting cylinder
standard with mast lowering and 2-D mast tilt
Up to 150 m depth

Accessories / Profile B 75 pro
 
Rinse hole depth: 150 m / diameter: 200 mm
Hole punch hole depth: 100 m / diameter: 155 mm
Dry drilling depth: 30 m / diameter: 219 mm
Holbohrschneckenverfahren Teufe: 35 m / diameter: 205 mm
Site investigation yes
Ordnance exploratory yes


Technical specifications

Drive unit (Deutz engine) 4 cyl. / 55 kW / 75 hp diesel (emission level 5)
Tank capacity (fuel) 45 l
ADLER Crawler Track F 35 Width: 835 mm - 1.235 mm (telescopic)
Support feet 4 x mechanical
Drill pipe 2 m
Feed length 2.3 m
Feed 15 kN
Retraction force 50 kN
Mast lowering 300 mm yes
2-D mast tilt by 5 °
forward and laterally yes
Feed system via hydraulic cylinder
hydraulic drill head with
Side scavenger ABK 800: 200 daNm / 80 U / min 2 1/2 "
Drilling drive can be swiveled mechanically (optionally hydraulically)
hydraulic drill head with
Transmission (2-stage)
Passage 2 1/2 "1st gear (slow): 440 da.Nm / 50 rpm
2nd gear (fast): 220 da.Nm / 100 rpm
other speeds and torques possible
Flushing pump 120 m3 / h - 8 bar
Lift Clamp Passage /
Lifting force / stroke up to Ø 219 mm / 100 kN / 200 mm
Clamp-crushing Hubschelle
Clamping force / stroke / lifting force /
Torque up to Ø 219 mm
118 kN / 250 mm / 120 kN /
10.6 kNm
Slant drilling optional
Winch hydraulic:
Tensile force / rope length / Ø rope 5 kN / 30 m / 6 mm
(optional 10 kN / 75 m / 7 mm)
Mast extension optional
Cable remote control for the
Drive yes
Cable remote control for driving
and drilling optional
Transport dimensions (L / W / H) 4.950 / 880 / 2.575 mm (without protective device)
Weight of basic unit from 3.5 t


application

well drilling
Geothermal well drilling
Geological exploration holes


Filters
Sort
display